图片展示
图片展示

Envrionmental

Responsibility Practice

绿色·环保·实践


 

图片展示

Green And Environmental

绿色·环保

Yingchao ceramic which as a modern ecological permeable brick manufacturer, with advanced all automatic NG sealed kiln, greatly reduces the energy consumption and pollution when producing. The environmental function is completely in conformity with reducing carbon emissions of our country.

The Road Will "Breath"

会“呼吸”的道路

Yingchao produces the permeable brick by automated production lines in natural gas, greatly reduces energy consumption and pollution while producing. Its Environmental protection function is completely in conformity with our country’s Strategy of energy conservation and emissions reduction.
图片展示
图片展示
图片展示
图片展示
图片展示
图片展示

Product

产品展示


 

City Six Major Elements

城市六大要素


 

Combining urban vertical elevation with engineering facilities, waterlogging prevention facilities with natural stream system, and surface drainage with escape canal, realizes general emission and over-standard rainwater emission.

图片展示

Difference

海绵城市传统城市的区别


 

图片展示

Eight functions of products

产品八大功能


 

图片展示
图片展示

Four Characteristics

产品四大特点


 

图片展示

1、Perviousness

 

Yingchao ceramic permeable brick is made from special inorganic materials burning in 1280 centigrade, with huge pore pipelines outside and inside, mighty water absorption capacity ( its coefficient of permeability over 3.0x10-2cm/s, which is far beyond the products in this market both here and aboard), being able to deal with the rainfall of 60-65mm/h.


2、Water retention

 

The permeable brick can save huge rainfall (over 60kh/square meter) with its pore pipelines after paving, greatly reduces output volume of urban pipeline runoff, and improves city Waterlogging phenomenon efficiently. It evaporates moisture under the sunshine in order to reduce the heat of field surface and regulate the humidity of air, and provide human a comfortable green life space.

 


3、Duty-cycle operation

 

The permeable brick can solve the problems in city construction such as ice stone cement/asphalt/stone-liked tile could not be used again because of the construction, then make solid waste pollution and increase the burden of municipal construction cost. With its unique paving way and design, it can prevent the phenomenon of source waste and produce good economic benefit and society benefit.

 


4、Crushing resistance,freezing tolerance and wind resistance

 

Made from inorganic materials, burned in 1280 centigrade high-temperature, and pressed by large-tonnage double press machine, it is the products with strong compressive strength (≥50MPa), rupture strength, weathering resistance, and freezing resistance which reach the country standard, would not be broken, peeled off and full of crakes in the condition of ±25℃ in 50 times, while its strength loss rate ≤3%. It is the ideal outdoor floor products.

 


 

图片展示

Eight functions of products

生态透水砖检查报告


 

图片展示
图片展示

Eight functions of products

 生态透水砖应用


 

1、Municipal works paving

 

the paving way of permeable brick can ensure abundant underground water resources in the district, reduce rainfall flow into other places, solve seasonal drought.


2、Garden paving

 

A、Beautify the garden, fill the garden integral color missing, work in concern with color of vegetation.

B、Maintain humidity of the earth of garden because of its high permeability, reduce water losing, therefore the vegetation can grow better.

C、The permeable brick made after high-press strength, stands wear and tear, would not cast off and fade, reduces the maintaining cost.


3、Drainage application

 

It can make the rest moisture flow into the underground pipe from its inside to outside then into the river, meanwhile ensure the quality of district environment, and realize green environment protection.

 

图片展示

Construction Process

施工流程


 

  1. Check and ensure the roadbed is flat and fully rolled

 

  1. Cover crushed stones whose diameter is ≤40mm for 100mm thickness, then compacted with vibration machine
  1. Cover the non-woven fabrics onto the stone avoiding soil layer separating, and the part of their interfaces should be overlapped in 100mm

 

  1. Cover the sands for buffer

 

  1. The thickness of the sands should be 35mm, after using the roller press machine compacting the sands at 30-40m/minute for 3-5 times

 

 

  1. Regulate the flatness and height of the sands
  1. Pave the permeable brick.  Make the datum line matching with horizontal line after fixed the horizontal line forming right angles. To adjust  the height with rubber hammer if the height difference is over ±3mm between surface height and paving measure height.
  1. Regulate sand mortar joint.  Use driver regulating the point locations in order to form the straight-line gaps.

Broom the Sand mortar joint into the mortar joint.

 

 

  1. ress the permeable bricks and mortar joint firmly.  pasting the rubber cover under the roller press machine, then use the roller press machine pressing 30-40mm/minutes at 3-5 times. If the height of the permeable bricks after paved is different, it should hammers them into the same height with rubber hammer.
  1. After clean the bricks surface, sprinkling water can solidify the mortar joint. The permeable bricks cannot be walked on after finished paved. They should be covered if rains.

General Construction Methods

一般施工方法


 

General Road Construction Methods

General construction methods

The construction methods of Yingchao’s permeable brick is same with chain brick’s. it should be cover a layer of non-woven fabric on the subbase in order to prevent the buffer sands layer running off.
图片展示
图片展示

It is very important of the condition of subbase pressing. If the pressing condition is not good will trigger uneven surface.

Use the river sands as layer of buffer.

The thickness should be 20mm-30mm.

Fully pressed by vibration machine.

Keep the top of brick for design section.

Pave the bricks according the design chart.

Scatter the mortar joint sands in equably (no. 4/ no.5 silica sands).

The permeable bricks should be pressed firmly with the roller press machine, especially the sides and the end of the machine.

Pls don’t use vibration compactor which will break the bricks.

图片展示

Construxtuin Guidance For Special Occasions

特殊场合施工图


 

图片展示
图片展示
图片展示

About us | products | project  | news

图片展示

WeChat official account

CONKACT US

联系我们

E-mail: winni209@163.com
Whatsapp: 0086-13794027808

Product Base: No. 1 District B, Yunlong Ceramics Case, Heyun Town, Qingxin County, Qingyuan City, Guangdong Province.

Company Address: Taobo Avenue, Huaxia Ceramics Expo City, Nanzhuang Town, Foshan City, Guangdong Province.